項目名稱： 激光投射器-DREAM

Laser projector -DREAM

申報單位： 深圳市思奧特光電科技有限公司

綜合介紹或申報理由：

在追求夢想的路上沒有止境，全新一代DREAM Mk3系列全新精密緊湊機身設計，獨立三層分離機體，極具現代感而又個性十足，專業級振鏡，機械式激光安全閘刀，以行動，追尋夢想。

Dream can be limitless. The new generation of Dream MK3 series, adopts new precise compact design. Three-layer of isolated structure gives us the unique sense of fashion. Concentric-circle design for the lens can soften the tough appearance of the device. Dream are fantastic, so let’s pursue our dreams with actions.

主要技術參數：

如下圖 The following figure

技術及工藝創新要點：

SD卡儲存播放海量節目

SD card can store and play a large number of programs.

獨具尖端科，采用智能手機芯片ARM方案，帶有外置儲存SD卡，具有高記憶容量、快速數據傳輸率、極大的移動靈活性以及很好的安全性，讓你發揮無窮想象力。

We acquire high technology and adopt intelligent chip ARM project with outlaying SD card which has high memory capacity, fast data transfer rate,great moving flexibility and excellent safety, meeting your endless imagination.

通過DMX調用保存節目

DMX interface for recall the built in shows and customized texts saved

通過USITT DMX512協議直接調用SD卡節目庫。

SD card program library is directly invoked through the USITT DMX512 protocol.

FB4控制系統

Powered by Pangolin FB4

內置FB4控制硬件，通過以太網連接，方便使用專業軟件進行遠距離激光效果編程，更加便捷的調試戶外激光工程的整體效果。

The built-in Pangolin FB4 control system can control the laser effect at a longer distance through the connection of the network cable, and more conveniently regulate the overall effect of outdoor laser engineering.

完美色彩混光技術

Perfect Color Mixing

使用紅綠藍半導體激光器，亮度高，發散角小，相干性好，穩定性強，光束效果更加明亮鮮艷。全模擬激光驅動，完美呈現高清真彩激光效果。

Using all LD lasers, high brightness, small divergence angel, good coherence, strong stability, delivering brighter laser beams.

機械式激光安全閘刀

Security protection

當圖案輸出小于±1.5時，能在0.1秒內切斷激光光路。確保不出現激光單點。配合，具備1T高速運算智能單片機芯片，通過復雜的多維運算比較，智能判斷激光束的安全狀況，當圖案輸出小于±1.5°時，就智能關斷激光的激發信號。雙重保護，雙重安全。

When the image outputs less than +/-1.5°, it can turn off the laser light path to make sure not appear laser light spot. With 1T high velocity intelligent chip,through complex arithmetic comparison, it can judge the security of laser beam. When the mage outputs less than +/-1.5° , it can turn off the laser signal, double protection,double security.

獨立三層式設計

Isolated three-layer design

全新精密緊湊機身設計，獨立三層式設計，完美將激光光路、電路控制及散熱風路獨立而分，激光器合光層，硅膠密封，防塵，防水，防煙油。

Totally new design of precise compact design, independent three layers design, perfectly separating laser light path, circuit control and heat radiation. Laser light mixing layer, silica gel sealing, dust-proof, water-proof, oil-proof.

精密三維調節架

Three dimensional adjusting bracket

合光方式采用精密三維調節架，確保激光光斑的質量。

Precise three-dimensional adjusting bracket guarantees the quality of laser spot.

超大散熱面積

Large heat radiator

300cm2 超大散熱面積，確保激光器的熱能交換。百頁窗式進出風口后，內置2對3路高轉速散熱風扇，一吸一出，最有效的將交換熱能帶走。

300cm2 for heat radiation to make sure the heat interchange in laser. Window-shades for ventilating, two sets of high speed heat radiation fan, one for inhaling, one for exhaling, taking away the interchanging heat.

專業戶外防雨恒溫箱（選配）

Professional outdoor rainproof incubator (optional)

內設溫度和濕度傳感器，基于半導體泵浦激光器內部22-23度之間的最佳工作溫度，當多方位傳感器檢測到溫度低于18度時，散熱風扇停止工作，內部加熱絲工作，加熱到20度停止工作；當溫度高于20度或濕度大于70%時，啟動風扇。（參數可根據現場環境手動設定）

Temperature and huity sensor inside, the best working temperature is 22-23°inside of diode-pumped solid-state laser. When sensor detects temperature lower than 18°, the fan will stop work, heater strip will work till the temperature up to 20°; when temperature higher than 20°huity more than 70%, fan will work.(the parameter can be set manually)

獲獎、專利情況：

實用型專利：ZL 2010 2 0508229.3

Practical patent: ZL 2010 2 0508229.3

申報單位介紹：

思奧特集團旗下CR-LASER品牌，創始于2003年，為集團的始創品牌，前身為正大方圓，是中國最早經營激光演示系統的公司之一。專業從事激光表演系統，智能化演藝燈光產品的研發、生產、銷售、工程項目為一體的綜合性現代化企業。CR-LASER一直以To be Marvelous(創造無限精彩)為品牌口號，以引導激光發展潮流為追求，為各種表演場合帶來震撼的視覺效果為目的，這些觀念已促使CR-LASER 成為國內外領先的專業激光研發生產和舞臺效果方案解決的提供商。

The CR-LASER brand of Siot Group, founded in 2003, is the groups original brand, formerly known as Zhengda Fangyuan, and is one of the earliest companies operating laser demonstration systems in China. Specializing in laser performance systems, intelligent performance lighting products research and development, production, sales, engineering projects as one of the comprehensive modern enterprises. CR-LASER has always taken "To be Marvelous" as its brand slogan, followed by guiding the trend of laser development and bringing shocking visual effects to various performance occasions. These concepts have prompted CR-LASER to become a leading provider of professional laser research and development and stage effect solutions at home and abroad.

產品圖片：